Is a primer (undercoat) used on concrete surfaces, asbestos-cement, and serves as a binder between the wall and materials such as plaster, facade, etc. Strengthens the surface by penetrating deep and is used for indoor and outdoor walls.

Is a high quality decorative paint. It is used for the decoration of outdoor facades. It is produced by blenders, pigments and special additives. Resistant to extreme weather conditions. It has minimal water permeability, breathes freely and is ecological. The surface to be painted must be dry, clean of dust and grease. Beforehand, PROFIX undercoat should be used and subsequently Fasadex should be applied in two layers.

Is a special undercoat for composite surfaces and covered by the initial coating of mineral- resistant surfaces, polished concrete surfaces, plasterboards and aged surfaces. The surface: must be sturdy, clean and resistant. Surfaces painted with washable paint and limestone must first be washed and cleaned with a brush. Absorbent surfaces must be pre-treated with a primer for absorbent surface.

Is a high-quality dispersion paint. It is used for interior wall decoration. It is suitable for tinting and very easy to apply. Resistant to rubbing with a wet cloth. The surface to be painted must be initially free of dust and grease. It is applied with a roller, brush or spray gun.

Is a special undercoat for composite surfaces and covered by the initial coating of mineral- resistant surfaces, polished concrete surfaces, plasterboards and aged surfaces. The surface: must be sturdy, clean and resistant. Surfaces painted with washable paint and limestone must first be washed and cleaned with a brush. Absorbent surfaces must be pre-treated with a primer for absorbent surface.

Cement-based mortar. Profix 10 is a lime-based mortar, black cement and additives for machine and manual application. It is used as a base mortar for final mortars with mineral, synthetic compounds, structural mortar, abrasion structure (abrieb) and sanding mortars. It is placed on interior and exterior walls made of tiles, concrete, siporex , concrete elements, ceilings, facades, etc.

PROFIX 50 is a leveling compound for walls and ceilings painted with various mortars, pre- preparation of walls for mineral and plastic facades. Minimum thickness 1mm. No other materials are added. Store in a dry place. Durability 6 months

Glues for Styrofoam and insulation panels Glues for Styrofoam and Styrocol insulation panels white is a white glue based on cement and additives. Styrocol White is used for fixing styrofoam panels on tiles, concrete, old mortar, etc. The surface must be flat, free of dust and not frozen; on old mortar stickiness and age should be checked Old concrete surfaces should be cleaned with water under pressure. Distorted surfaces should be fixed and reinforced as necessary.

Adhesive for styrofoam and insulating panels ready Adhesive for styrofoam and insulating panels styrocol Standard is a thin layer adhesive based on cement and additives. Stirokol Standard is used for gluing styrofoam panels on tiles, concrete, old mortar, etc. The surface must be flat, dust-free and not frozen. In old mortars, the stickiness and age should be checked. Old concrete surfaces should be cleaned with water under pressure. Distorted surfaces should be fixed and reinforced as necessary.

It is ready-made material, leveling mortar for the final layer based on lime. It is used for smoothing walls and ceilings on internal surfaces, which must be painted with basic mortar or concrete surfaces, with as little moisture as possible. After it dries well, it is recommended to paint it or apply wallpaper. Store in a dry place.

ABRIEB full and structural based on lime, white cement and marble sand with various size particles. Contains adhesion materials and better handling. Vapor permeable, Indoor and outdoor use as well as plasterboard, basic supports made of dry gypsum as cover ABRIEB for thermo- insulation systems. The surface ABRIB PROFIX is applied must be clean and dry. Do not work at temperatures below +5C. Do not mix with other materials. Store in a dry place. Shelf life 3 months.

PROFIX Proficol Standard is a thin layer adhesive for tiles, based on cement and additives. Used forgluing ceramics, marble and granite tiles on walls and floors on interior surfaces. The surface must meet the defined construction requirements. To be stored in a dry place, no longer than 12 months from the production date.

PROFIX Proficol White is a thin layer glue for tiles, based on white cement and additives. Used for gluing ceramic, marble and granite tiles to walls and floors, on interior surfaces. The surface must meet the defined construction requirements. To be stored in a dry place, no longer than 12 months from the production date.

PROFIX Proficil Special is a thin layer glue for tiles, based on cement and additives. Used for gluing of ceramic, marble and granite tiles to walls and floors, on interior and exterior surfaces. It is resistant to high temperatures. The surface must meet the defined construction requirements. To be stored in a dry place, no longer than 12 months from the production date

The 25KG package is slowly dissolved in 6 to 7 liters of clean water, mixed well until the mass is homogenized. The mixed mass should rest 5-10 min before use. The surface where the Profix adhesive Siporex will be used must be leveled with a suitable tool. The prepared mass should be applied in about 3 hours. The bricks placed on the wall must remain intact/immovable for at least 1 day.